***** Moved to http://cvairsoft.com/forum/ *****
This forum has moved to http://cvairsoft.com/forum/

Join us there!

barrel length

View previous topic View next topic Go down

barrel length

Post by Silent Night on Wed Feb 24, 2010 9:49 pm

hey guys i have a question im going to put a silencer on my kwa mk36c for barrel extension im gonna put a m100 spring in it so i was wondering if i should go with the 300mm 6.03 or the 363mm 6.03 barrel. it has a 247 6.05 barrel in it. and the silencer is 160mm long
avatar
Silent Night

Location : Logan and Clinton

View user profile

Back to top Go down

Re: barrel length

Post by Panzerfaust on Wed Feb 24, 2010 10:04 pm

You'll get a little better accuracy out of the 363mm, and the barrel will still end well inside your suppressor

_________________

Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.
avatar
Panzerfaust
CVA Officer

Age : 36
Location : Logan, UT

View user profile

Back to top Go down

Re: barrel length

Post by Silent Night on Thu Feb 25, 2010 12:03 am

ok cool thanks panzerfaust
oh and what barrel would you think is better the matrix brand or the madbull? they both cost the same and are in my budget?
avatar
Silent Night

Location : Logan and Clinton

View user profile

Back to top Go down

Re: barrel length

Post by Panzerfaust on Thu Feb 25, 2010 12:25 am

I'm looking at these right now: http://www.airsoftpost.com/product_info.php?products_id=24394 .
6.05mm diameter is good enough to improve accuracy while not being so tight so as to be susceptible to dust and dirt caused jams. You also have a range of 100mm- 510mm lengths with 10mm difference between them. You could very well bring the inner barrel right up the end of your suppressor, if you were so inclined.

Between the matrix and madbull though, I'd have to say madbull has the better reputation. There's quite a few folks around this forum that use madbull 6.03mm python barrels in their AEG's.

_________________

Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.
avatar
Panzerfaust
CVA Officer

Age : 36
Location : Logan, UT

View user profile

Back to top Go down

Re: barrel length

Post by Silent Night on Thu Feb 25, 2010 12:29 am

ok thanks man im glad ya know alot about airsoft ha i read about the tighter the barrel the more likely it is to get a jam the barrel it comes stock with is a 6.05 and shoots great maybe i will stick with the 6.05 thanks
avatar
Silent Night

Location : Logan and Clinton

View user profile

Back to top Go down

Re: barrel length

Post by Panzerfaust on Thu Feb 25, 2010 1:06 am

haha it comes with a 6.05 then? That's not bad for a stock gun. I think the CYMA ak74 I've got comes with a 6.04mm and I doubt I'll ever switch it out. Love that gun! Very Happy

I tried a JBU 6.03mm in my FAL and it was nice for a while. I had alot of problems with it getting dirty and jamming up on me, and eventually swapped it out with a brass stock TM barrel. On the otherhand some people have had great results with the Dees custom 6.01mm's. Your mileage will vary.

_________________

Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.
avatar
Panzerfaust
CVA Officer

Age : 36
Location : Logan, UT

View user profile

Back to top Go down

Re: barrel length

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum